North American Network Operators Group

Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

Re: DC power versus AC power

  • From: Stephen Sprunk
  • Date: Sun Dec 29 22:28:03 2002

Thus spake "Scott Granados" <scott@wworks.net>
> Is 48V DC at the amps present normallyin switch rooms etc enough to cause
> electricucian?  I have seen bad things with wrenches dropped across
> batteries even 12 volt car batteries although in this case it was a large
> battery bank in a submarine but I was curious about the 48V sources in
> switch rooms.

2500-class devices only need 2A, but a GSR needs 60A -- and 60A DC is
significantly more dangerous than 60A AC due to the duty cycle.

If you _remember_ to defuse/disable the leads from the A _and_ B fuse panels
to the device you're working on, you'll be okay.  The real danger is when
people are working on the "upstream" side of the power panel, which is often
difficult/impossible to defuse and carries significantly higher amperages.

S