North American Network Operators Group|
Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical
RE: No "encapsulation" command on IOS 12.2(12a) ??
Kind of OT for NANOG, you should go to cisco-nsp for these kinds of questions. However, to answer your question anyway you need an IP plus version of IOS to get 802.1q/ISL subifs on a 36xx router. That's only plain IP (c3620-i vs. c3620-is) -----Original Message----- From: Roman Volf [mailto:email@example.com] Sent: Friday, October 24, 2003 5:49 AM To: firstname.lastname@example.org Subject: No "encapsulation" command on IOS 12.2(12a) ?? Show Version: Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE (fc1) flash image: System image file is "flash:c3620-i-mz.122-12a.bin" I'm trying to configure a FastEthernet sub interface for 802.1q VLANs, but theres no encapsulation command. I've googled it up for about 2 hours and have come up with nothing... the following command sequence is documented dozens of times: As shown on: http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120 t/120t1/8021q.htm#wp3944 interface fastethernet slot/port.subinterface-number encapsulation dot1q vlanid Any help would be appreciated.