North American Network Operators Group

Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

Re: BGP - weight

  • From: E.B. Dreger
  • Date: Sat Feb 14 12:06:26 2004

SH> Date: Sat, 14 Feb 2004 12:23:06 +0000
SH> From: Sven Huster


SH> We had some recent issues were it looks like the core got
SH> "out of sync" with the border (looks more like a sw issue
SH> than just convergence delay) and packets bounced back and
SH> forth between them.

Yikes.  I'd try to see what was wrong with your IGP before using
a big (albeit highly localized) hammer.


SH> I know this doesn't solve the cause but the before digging
SH> for the initial reason I want a quick workaround.

I'm not so sure about having traffic leave through the router via
which it arrived.  You have no way of knowing that unless you
were to tag packets or track flows, keeping state...

If you wish to force packets through a router, you might consider
tagging learned routes with a community corresponding to the
router that learned the route.  On the edge router you could
force next hop according to community.

Again, though, these are gross and messy.  I'm not sure if hacks
will make your situation better or worse.


Good luck,
Eddy
--
EverQuick Internet - http://www.everquick.net/
A division of Brotsman & Dreger, Inc. - http://www.brotsman.com/
Bandwidth, consulting, e-commerce, hosting, and network building
Phone: +1 785 865 5885 Lawrence and [inter]national
Phone: +1 316 794 8922 Wichita
_________________________________________________________________
          DO NOT send mail to the following addresses :
  blacklist@brics.com -or- alfra@intc.net -or- curbjmp@intc.net
Sending mail to spambait addresses is a great way to get blocked.