North American Network Operators Group|
Date Prev | Date Next |
Date Index |
Thread Index |
Author Index |
Re: Global Crossing Contact / BGP and SONET interaction question
- From: Ian Mason
- Date: Wed Jul 26 09:04:54 2006
On 26 Jul 2006, at 08:29, Forrest W Christian wrote:
Randy Epstein wrote:
I don't have an answer to the root cause of your problem, and I'm
not looking for a discussion on route dampening (there are enough
debates onthis issue to make your head spin), but may I suggest
you raise your hold timers to prevent your BGP sessions from going
down on short disturbances as these?
From what I can tell the disturbances are less than a second in
duration. It doesn't appear that this is a hold-timer issue,
although I would like GX to set it at something higher than 90
seconds (mine is already at a higher value- but the lower value
wins during negotiation). I really suspect that either a) GX has
some semi-weird configuration where the SONET ring switching from
the normal to the protect path and back causes BGP to reset on the
border router I'm attached to or b) There is a separate issue which
is causing BGP to flap. Or of course, something else completely
Unfortunately, I haven't been able to figure out how to talk to
anyone at GX which actually has access to the routers and knows
anything about BGP.
The timing of protection switching on a SONET ring is of completely
the wrong order to upset a BGP session. From memory there's a
designed in upper bound of 200 mS from fault to fully restored with
typical values being more like 50 mS.
One possibility that occurs to me is that the A end here might be
using a router with a SONET card, and the router software is
propagating a SONET event through the stack causing BGP to react to
an event it wouldn't even see on a physically separate SONET ADM.
That is pure speculation though.