North American Network Operators Group|
Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical
Re: IPv6 Training?
Alex Rubenstein writes:Too bad the IPv6 support on the low-end Ciscos is mostly broken in many ways (does not work on WLAN, does not work across the local 4 port switch, etc.) , which are also the routers most classrooms could afford.
lab-router#conf t Enter configuration commands, one per line. End with CNTL/Z. lab-router(config)#ipv6 ? access-list Configure access lists cef Cisco Express Forwarding for IPv6 dhcp Configure IPv6 DHCP general-prefix Configure a general IPv6 prefix hop-limit Configure hop count limit host Configure static hostnames icmp Configure ICMP parameters local Specify local options mfib Multicast Forwarding mfib-mode Multicast Forwarding mode mld Global mld commands multicast-routing Enable IPv6 multicast neighbor Neighbor ospf OSPF pim Configure Protocol Independent Multicast prefix-list Build a prefix list route Configure static routes router Enable an IPV6 routing process unicast-routing Enable unicast routing