North American Network Operators Group
Date Prev | Date Next | Date Index | Thread Index | Author Index | Historical

Re: Cisco uRPF failures

  • From: Saku Ytti
  • Date: Sat Sep 13 16:00:40 2008 
On (2008-09-13 13:26 -0500), Brandon Ewing wrote:

Hey Brandon,

> Are you sure?  According to the IOS guide for 3560E/3750E, "ip verify" is
> still an unsupported interface command.  I don't have a 3560E handy to test
> on, but I know that a non-E 3560 refuses it with a notice regarding how
> verification is not supported by hardware.

To be honest I'm not sure. Feature-wise highlights what I've taken note of
E series in 3560 is jumbo MTU support in L3 and uRPF in comparison to non E,
apart from the obvious 10GE and PSU enhancements.
While I haven't personally ran 3560E, I'm fairly confident that it's
supported, in hardware (And software to turn it on).

uRPF is mentioned here:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps7078/product_data_sheet0900aecd805bac22.html
Advanced Security
â Unicast RPF feature helps mitigate problems caused by the introduction of
malformed or forged (spoofed) IP source addresses into a network by
discarding IP packets that lack a verifiable IP source address.


-- 
  ++ytti